A towel radiator <strong>connected to central heating</strong> is the cheapest to run if you have a boiler or heat pump. The <strong>electric</strong> model is the easiest to fit in a renovation and works all year, the <strong>dual-fuel</strong> model combines both, and a <strong>fan heater</strong> warms the room in minutes. For a bathroom, allow <strong>100 to 150 W per m²</strong> in most cases. Here is how to choose.
Quick answer
- Existing central heating and accessible pipes: hot-water towel radiator, the cheapest to run.
- Renovation without pipework or upstairs bathroom: electric towel radiator.
- Dry towels in summer without central heating: dual-fuel model (water + element).
- Cold bathroom in the morning: model with a 1,000 W or larger fan heater.
- Output: roughly 100 to 150 W/m² depending on insulation.
Electric, hot water or dual fuel: the differences
A hot-water model connects to the central heating circuit like a radiator, with two valves. It heats when the heating runs, so little or not at all in summer.
An electric model contains a heat-transfer fluid warmed by an element and is controlled by a thermostat or timer. Examples: digital electric towel radiators from 750 to 1,000 W.
A dual-fuel model is connected to central heating and fitted with an electric element for summer.
A fan heater adds blown warm air to heat the room quickly: for example the Desco Tubo Turbo with a 1,000 W fan or digital models with a 1,750 to 2,000 W blower.
What output for which bathroom
A bathroom is kept warmer than other rooms (about 22 to 24 °C). Allow 100 W/m² in a well-insulated house and up to 150 W/m² in an older house. Note: the output of a hot-water model is stated for a given temperature regime (often 75/65 °C); with a heat pump or a low-temperature condensing boiler the real output is much lower, so choose a larger model.
- 4 m² bathroom: 400 to 600 W
- 6 m² bathroom: 600 to 900 W
- 8 m² bathroom: 800 to 1,200 W
- 10 m² bathroom: 1,000 to 1,500 W, often with a fan heater
Size, connection and finish
- Height: from 1,000 to 1,800 mm; the taller, the more towels it dries.
- Connection (hot water): side, left-right or central; check the pipe centres before ordering.
- Designer thermostatic valves and mounting kit: often sold separately.
- Finish: white, chrome, matt black, anthracite… chrome gives slightly less heat than a painted model of the same size.
Electrical safety in the bathroom
In Belgium, electrical appliances in bathrooms must respect the safety zones and the requirements of the AREI/RGIE (protection rating, insulation class, residual-current protection). Have the position and connection checked by an electrician.
You will find towel radiators, valves and accessories on alphanco.be, with delivery in Belgium or pickup at the ALPHA&CO store in Dilbeek (Ninoofsesteenweg 79, 1703 Dilbeek).
Frequently asked questions
What towel radiator output for a 6 m² bathroom?
Allow about 600 to 900 W: 100 W/m² in a well-insulated house, up to 150 W/m² in an older house.
Does an electric towel radiator use a lot of power?
Consumption depends on output and running time. A thermostat and timer limit heating to the useful moments, for example morning and evening.
Can a towel radiator be connected to a heat pump?
Yes, but a heat pump runs at low temperature: the real output will be much lower than the catalogue value. Choose a larger model or a dual-fuel model.
What is the fan heater on a towel radiator for?
The fan blows warm air to heat the bathroom in a few minutes, handy in the morning. The radiator body keeps drying the towels.
Where to buy a towel radiator near Brussels?
ALPHA&CO sells electric, hot-water and fan-assisted towel radiators (Desco, Belrad, Aloni…) on alphanco.be, with delivery in Belgium or pickup at the Dilbeek store, Ninoofsesteenweg 79, 1703 Dilbeek.

